E6013 3/32" 5#pack UNIBRAZE ELECTRODE

Unibraze 6013
(E6013)
Unibraze 6013 is an all-purpose electrode that can be used with either AC or DC operation.
Originally developed for light gage metal, it offers sufficient penetration for welding on heavier
assemblies. Ideal for general purpose fabrication, machine parts, metal buildings and
structures, and shaft build-up.
Features Benefits
• All position • Welds in flat, horizontal, vertical, and overhead positions
• Slag removes easily • Quick clean-up
• Excellent arc stability • Welding accuracy and efficiency
• Fast-freeze • Excellent for poor fit-up
Typical Weld Metal Chemistry
Carbon .10
Manganese .28
Silicon .27
Phosphorus .012
Sulphur .016
Typical Mechanical Properties
Tensile Strength 72,600 psi (501 MPa)
Yield Strength 61,300 psi (423 MPa)
Elongation 26.5%
Reduction of Area 25% to 55%
Recommended Operating Parameters
Dia. Type of Power Optimum Amps
3/32” AC, DCEN or DCEP 70
1/8” AC, DCEN or DCEP 100
5/32” AC, DCEN or DCEP 150
3/16” AC, DCEN or DCEP 190
For out of position welding, reduce amperages shown by 15% .
Specifications
AWS A5.1 ASME SFA5.1 Class E6013
Standard Sizes
3/32” (2.4mm), 1/8” (3.2mm), 5/32” (4.0mm), 3/16” (5.0mm)
*The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Unibraze
expressly disclaims any liability incurred from any reliance thereon. Typical data are obtained when welded and tested in accordance with
AWS A5.1 specification. Other tests and procedures may produce different results. No data is to be construed as a recommendation for
any welding condition or technique not controlled by Unibraze.